My Cart [ 0 ]
Home > Antibodies > Primary Antibodies for Epitope Tags  > Anti-GFP Monoclonal Antibody

Anti-GFP Monoclonal Antibody

Anti-GFP mAb, Anti-GFP mouse monoclonal antibody, GFP Monoclonal Antibody

Catalog No. Product Name Size List Price (US$) Quantity
PA000557-P-214 GFP Monoclonal Antibody 50 ug 100.00
PA000557-P-214 GFP Monoclonal Antibody 100 ug 150.00
PA000557-P-214 GFP Monoclonal Antibody 200 ug 275.00
Description

Background of GFP Antibody (Anti-GFP Antibody)

Green fluorescent protein (GFP), originally isolated from the jellyfish Aequorea victoria, has become one of the most widely used reporter tags in modern cell biology, molecular biology, and biochemistry research. Since its first heterologous expression in mammalian cells in 1994, GFP tagging has remained the gold standard for real-time protein tracking, as it allows direct visualization of protein localization, dynamics and interactions without disrupting cellular function when fused to a target protein of interest. Our anti-GFP antibody (also referred to as gfp antibody or anti gfp antibody across routine laboratory workflows) is a high-specificity, affinity-purified monoclonal antibody designed to recognize both native and denatured forms of GFP, as well as its common spectral variants including EGFP, YFP, EYFP, and CFP, with negligible cross-reactivity to unrelated mammalian proteins or other common fluorescent tags such as RFP and mCherry.

This GFP antibody has been thoroughly validated for multiple core experimental applications with consistent batch-to-batch performance. For GFP antibody western blot workflows, it delivers sharp, clean bands at the expected ~27 kDa molecular weight position for unfused GFP, and accurately recognizes expected sizes for GFP-tagged fusion proteins with minimal background signal, making it highly reliable for verifying GFP fusion protein expression levels in whole cell lysates, tissue homogenates, and purified protein samples. It produces linear signal across a broad range of protein loading amounts (10–50 µg per lane), enabling accurate semi-quantitative comparison of fusion protein expression across experimental conditions. For GFP antibody immunofluorescence (IF) and immunocytochemistry (ICC) assays performed on fixed cells or tissue sections, it produces bright, specific intracellular staining that clearly co-localizes with intrinsic GFP fluorescence, allowing researchers to accurately validate the subcellular localization of GFP-tagged proteins even when native GFP signal is quenched during fixation and permeabilization steps, such as in paraformaldehyde-fixed archival samples.

Unlike many generic anti gfp antibody products on the market, our anti-GFP antibody works across a wide range of routine experimental systems, including gene expression monitoring, protein interaction validation via co-immunoprecipitation (Co-IP), immunohistochemistry (IHC) on paraffin-embedded samples, ELISA, dot blot, and transgenic organism expression detection. It eliminates the common issue of weak detection or high background seen with lower-quality GFP antibodies, particularly for applications requiring high sensitivity such as low-abundance GFP fusion protein detection, co-localization analysis in primary cells, or imaging of weakly expressed GFP-tagged constructs. The antibody recognizes a conserved N-terminal epitope shared across GFP variants, so it works reliably regardless of whether the tag is placed at the N- or C-terminus of the target protein.

Our GFP antibody is suitable for use with samples from human, mouse, rat, and other mammalian cell lines, as well as common model organisms expressing GFP-tagged constructs, including transgenic zebrafish, Drosophila and mouse tissues. For WB experiments with GFP-tagged constructs, we recommend pairing this antibody with a validated housekeeping loading control such as beta-actin, GAPDH or beta-tubulin to normalize protein loading across lanes. For IF applications, we recommend using fluorophore-conjugated secondary antibodies with minimal spectral overlap with GFP fluorescence (e.g., Alexa Fluor 594 or 647 conjugates) to avoid bleed-through between channels.

For best results, avoid repeated freeze-thaw cycles and centrifuge the vial briefly before use to recover maximum product volume. For bulk orders, custom conjugation services (including biotin, HRP, and fluorophore labeling such as FITC, Alexa Fluor 488, Alexa Fluor 594, and Cy3) are available upon request, with typical 2–3 week turnaround for custom formulations. Please contact our scientific support team for custom sizes, bulk pricing, or conjugate formulations tailored to your specific experimental needs.

PA000557-P-214: GFP Monoclonal Antibody

Mouse Monoclonal Antibody.
Specificity/Sensitivity:Recognizes native and denatured GFP and its spectral variants EGFP, EYFP and ECFP. No cross-reactivity with RFP, mCherry, DsRed or endogenous mammalian cellular proteins. Detects N-terminally GFP-tagged fusion proteins with high sensitivity; detection of C-terminally GFP-tagged fusion proteins should be validated by the end user, as epitope accessibility can vary with fusion orientation.
Applications: Western Blot (WB), Immunoprecipitation (IP), ELISA, Dot Blot, Immunostaining (IF/ICC, IHC).
Immunogen: N-terminal peptide of GFP (Aequorea victoria) conjugated to KLH.
Form of Antibody: 1 mg/ml in 10 mM PBS, pH 7.2, with 0.05% NaN3.
Storage/Stability: Stable for 1 year at -20°C and 3 months at 2-8°C upon receipt. For maximum recovery, centrifuge the original vial after thawing and before removing the cap. Aliquot to avoid repeated freezing and thawing (limit to <3 freeze-thaw cycles).
Molecular Weight: ~27 kDa (238 aa, computed); detects GFP-fusion proteins at 26.9 kDa plus the molecular weight of the fused target protein.
Reactivity:Validated for GFP/EGFP/EYFP/ECFP; reactive with samples from human, mouse, rat and other mammalian cell lines, as well as GFP-expressing transgenic model organisms. No reactivity with untransfected cells.
Epitope: N-terminal region of GFP (residues 1-20 of native GFP).
Recommended Starting Dilutions: WB: 1:1000 (titrate 1:500–1:5000); IF/ICC: 1:500 (titrate 1:200–1:2000); IP: 2–5 µg per mg of total cell lysate; IHC-P: 1:200; ELISA: 1:2500; Dot Blot: 1:1000.
Shipping Conditions: Shipped with blue ice packs; stable for 5 days at ambient temperature during transit.
RRID: AB_3757248

Recommended Protocols for Anti-GFP Antibody

Western Blot Protocol

  1. Sample preparation: Lyse cells or tissues in ice-cold RIPA buffer (50 mM Tris-HCl pH 7.4, 150 mM NaCl, 1% NP-40, 0.5% sodium deoxycholate, 0.1% SDS) supplemented with fresh protease inhibitor cocktail. Incubate on ice for 30 min, centrifuge at 14,000×g for 15 min at 4°C to collect supernatant. Boil samples in 1× SDS-PAGE loading buffer at 95°C for 5 min before loading.
  2. Electrophoresis: Load 20–30 µg of total protein per lane. Run on a 10–12% SDS-PAGE gel at 100 V for 10–15 min (stacking gel), then 120 V until the dye front reaches the bottom of the gel.
  3. Transfer: Transfer proteins to a 0.45 µm PVDF membrane (pre-activated in methanol) via wet transfer at 300 mA for 90 min at 4°C, or semi-dry transfer at 15 V for 30 min.
  4. Blocking: Block the membrane in 5% non-fat dry milk dissolved in TBST (20 mM Tris-HCl pH 7.4, 150 mM NaCl, 0.1% Tween-20) for 1 hour at room temperature with gentle shaking.
  5. Primary antibody incubation: Dilute anti-GFP antibody to 1:1000 in blocking buffer, incubate with membrane overnight at 4°C with gentle shaking.
  6. Washing: Wash membrane 3 times with TBST, 5 min per wash at room temperature.
  7. Secondary antibody incubation: Incubate with HRP-conjugated goat anti-mouse IgG (diluted 1:5000 in blocking buffer) for 1 hour at room temperature.
  8. Detection: Wash membrane 3 times with TBST, then incubate with ECL chemiluminescence reagent for 1 min, and expose to X-ray film or digital imager for 1–5 min (adjust exposure time based on signal intensity).

Immunofluorescence / ICC Protocol

  1. Fixation: Aspirate culture medium, wash cells once with PBS, fix with 4% paraformaldehyde in PBS for 15 min at room temperature (avoid methanol fixation as it may denature the GFP epitope).
  2. Permeabilization: Wash cells 3 times with PBS, then permeabilize with 0.2% Triton X-100 in PBS for 10 min at room temperature.
  3. Blocking: Block cells in 5% normal goat serum (or 5% BSA) in PBS for 1 hour at room temperature to reduce non-specific binding.
  4. Primary antibody incubation: Dilute anti-GFP antibody to 1:500 in blocking buffer, add to cells and incubate overnight at 4°C in a humidified chamber.
  5. Washing: Wash cells 3 times with PBS, 5 min per wash.
  6. Secondary antibody incubation: Incubate with fluorophore-conjugated goat anti-mouse IgG (diluted 1:1000 in blocking buffer, protected from light) for 1 hour at room temperature. Use Alexa Fluor 594/647 conjugated secondary antibodies to avoid spectral overlap with GFP fluorescence.
  7. Mounting and imaging: Wash cells 3 times with PBS, mount with DAPI-containing antifade mounting medium, and image with a fluorescence or confocal microscope.

Troubleshooting Guide

Common experimental issues and solutions for anti-GFP antibody applications

No signal or very weak bands in Western blot?

Possible causes: (1) Insufficient protein loading (use ≥20 µg total protein per lane for low-abundance constructs); (2) GFP expression level is too low in your sample; (3) Primary antibody dilution too high (try 1:500 instead of 1:1000); (4) Incomplete protein transfer (check transfer efficiency with Ponceau S staining); (5) Inappropriate blocking reagent (use 5% non-fat milk instead of BSA for this antibody); (6) ECL reagent is expired or not evenly applied; (7) Target protein is degraded, ensure protease inhibitors are added to lysis buffer.

High background or non-specific extra bands in WB?

Possible causes: (1) Primary antibody concentration too high (titrate down to 1:2000–1:5000); (2) Insufficient washing (increase to 3×10 min washes with TBST containing 0.1% Tween-20); (3) Insufficient blocking (extend blocking time to 2 hours at room temperature, or try blocking overnight at 4°C); (4) Secondary antibody concentration too high or shows non-specific binding; (5) Over-exposure during imaging (reduce exposure time to avoid background accumulation); (6) Non-specific bands may result from protein degradation or isoform cross-reactivity, verify with knockout or untransfected control.

Band appears at incorrect molecular weight position?

Possible causes: (1) Remember unfused GFP runs at ~27 kDa; GFP-fusion protein runs at 27 kDa plus molecular weight of your target protein (e.g. GFP-actin runs at ~69 kDa); (2) Partial protein degradation leads to lower molecular weight bands, ensure samples are properly prepared with fresh protease inhibitors; (3) Post-translational modifications (glycosylation, phosphorylation) may cause band shifting; (4) Gel concentration is not appropriate for your target protein size.

No staining or extremely weak signal in IF/ICC?

Possible causes: (1) Over-fixation or incorrect fixative (avoid methanol, use 4% PFA only; fixation longer than 20 min may mask epitopes); (2) Insufficient permeabilization for intracellular antigens; (3) Primary antibody dilution too high; (4) Primary/secondary antibody incubation time too short (try extending primary incubation to 2 nights at 4°C); (5) GFP expression level is too low in your sample.

High background, non-specific signal or edge effects in IF?

Possible causes: (1) Insufficient blocking (use 5% normal goat serum instead of BSA to reduce Fc receptor binding in cells); (2) Samples dried out during incubation steps (always keep samples in a humidified chamber); (3) Secondary antibody concentration too high; (4) Insufficient washing steps; (5) Autofluorescence from tissue samples, use appropriate background controls.

Signal bleed-through / cross-talk between GFP and secondary antibody channels in IF?

Possible causes: Incorrect choice of secondary antibody fluorophore. GFP emits in the green channel (~510 nm), so avoid green fluorophores (FITC, Alexa Fluor 488) for secondary detection. Instead, use far-red conjugates such as Alexa Fluor 594 or Alexa Fluor 647 to avoid spectral overlap. Use sequential scanning mode on confocal microscopes to reduce channel cross-talk.

Target protein fails to precipitate in IP experiments?

Possible causes: (1) Insufficient antibody amount (use 2–5 µg per mg of total lysate); (2) Lysis conditions are too harsh, disrupting antibody-antigen interaction (use milder lysis buffer such as NP-40 lysis buffer without SDS/deoxycholate); (3) Lysates not pre-cleared with protein A/G beads before adding antibody; (4) Incubation time too short (incubate antibody with lysate for 2–4 hours or overnight at 4°C); (5) Beads not properly blocked, leading to non-specific binding.

Frequently Asked Questions (FAQ) about Anti-GFP Monoclonal Antibody

Q: Which GFP variants does this antibody recognize? Does it cross-react with other fluorescent proteins?

This antibody recognizes native and denatured forms of GFP, EGFP, EYFP and CFP, as the targeted N-terminal epitope is highly conserved across these variants. It does NOT cross-react with red fluorescent proteins including RFP, mCherry or DsRed, making it suitable for multicolor imaging experiments alongside red/far-red fluorescent tags.

Q: Can this antibody be used for immunoprecipitation (IP)?

Yes. This antibody works for immunoprecipitation under both native and mild denaturing conditions. Recommended amount is 2–5 µg of antibody per mg of total cell lysate. Pre-clear lysates with protein A/G agarose beads before adding antibody to reduce non-specific binding. It can be used for both co-IP experiments to validate protein interactions, and for enrichment of GFP-fusion proteins prior to mass spectrometry.

Q: Does this antibody detect endogenous GFP in transgenic animal tissues?

Yes, this antibody reliably detects GFP expressed in transgenic tissues (mouse, zebrafish, Drosophila, C. elegans) as long as expression levels are sufficient. We recommend loading 30–50 µg of total tissue protein per lane for WB detection of low-expression GFP transgenic lines. For IF on tissue sections, heat-induced epitope retrieval (HIER) with citrate buffer pH 6.0 is recommended before staining.

Q: Does it matter if GFP is fused to the N-terminus or C-terminus of my target protein?

Yes, it can matter depending on the fusion orientation. Since this antibody targets the N-terminal epitope of GFP, it recognizes N-terminally GFP-tagged fusion proteins (GFP-Target) with high efficiency. For C-terminally GFP-tagged fusion proteins (Target-GFP), detection should be validated by the end user, as epitope accessibility can vary due to the fusion orientation.

Q: What species samples is this antibody reactive with?

Since GFP is a heterologous protein from jellyfish, this antibody reacts with GFP expressed in any mammalian cell line (human, mouse, rat, hamster) as well as common model organisms (zebrafish, Drosophila, yeast). It shows no reactivity with untransfected cells or tissues that do not express GFP, as there is no homologous protein in mammalian genomes.

Q: Can this antibody be used for IHC on formalin-fixed paraffin-embedded (FFPE) sections?

Yes. For IHC-P applications, we recommend heat-induced epitope retrieval (HIER) using citrate buffer pH 6.0 for 20 min before staining. Recommended starting dilution is 1:200; optimal dilution should be titrated by the end user based on tissue type and fixation conditions.

Q: How should I store this antibody? How many freeze-thaw cycles can it withstand?

Upon receipt, store at -20°C for long-term storage (stable for 12 months). For short-term use within 3 months, store at 2–8°C. Aliquot the antibody into small working volumes to avoid repeated freeze-thaw cycles; we recommend limiting to no more than 3 freeze-thaw cycles to preserve antibody activity. Always centrifuge the vial briefly after thawing before opening the cap to recover maximum volume.

Q: What sizes are available and how much does it cost?

This antibody is available in three standard sizes: 50 µg ($100), 100 µg ($150), and 200 µg ($275). Volume discounts are available for bulk orders over 1 mg. Custom sizes can be requested by contacting our sales team.

Q: Do you offer custom conjugation services for this antibody?

Yes. We offer custom conjugation services for this antibody including biotin, HRP, and fluorophore labeling (FITC, Alexa Fluor 488/594/647, Cy3, Cy5). Typical turnaround time is 2–3 weeks. Minimum order size for custom conjugation is 100 µg. Please contact us for a custom quote.

Q: How fast does it ship and where does it ship from?

All orders ship from our USA warehouse. In-stock items are shipped within 24 hours of order confirmation via ice pack. Standard shipping takes 2–5 business days within the continental US. Expedited shipping options are available at checkout. International shipping is available to most countries.

References of Anti-GFP Monoclonal Antibody

Alexandra L. McCann, et al. Cold Spring Harb Protoc. 2011;2011(12):1284-1287. PMCID: PMC4784430
“We present a standardized protocol for conjugating monoclonal anti-GFP antibodies (clone 3E6, mouse IgG) to carboxylated polystyrene microspheres, and demonstrate successful optical trapping of GFP-tagged protein complexes bound to these microspheres. The described procedure provides a robust method for applying force to GFP-tagged molecules in living cells, enabling biophysical measurements on genetically defined protein assemblies without the need for additional epitope tags. This approach has been validated in vitro using recombinant GFP and in live cell optical trapping experiments, and yields consistent antibody coupling efficiencies suitable for single-molecule force spectroscopy.”
(Tags: anti-GFP antibody; anti-GFP monoclonal antibody; anti-GFP mAb; GFP antibody western blot)
Andrea N. Moreno, et al. Nat Neurosci. 2022;25(12):1634-1646. PMCID: PMC9817483
“Background:Astrocytes tile the brain and form an extensive non-neuronal network that is hypothesized to modulate neuronal circuit function via G-protein coupled signaling. Using chemogenetic hM4Di (Gi) DREADDs selectively expressed in cortical astrocytes alongside GFP reporter constructs, combined with in vivo two-photon calcium imaging and electrophysiology, we show that astrocytic Gi activation triggers robust, widespread synchronization of cortical neuronal networks. Anti-GFP antibody and rabbit anti-GFP polyclonal antibody were used to validate DREADD-GFP expression levels and astrocyte targeting across experimental cohorts via immunoblotting and immunofluorescence staining. These results establish a critical role for astrocytic Gi signaling in shaping large-scale cortical network dynamics, with implications for understanding astrocyte-neuron interactions in physiological and pathological brain states.”
(Tags: GFP antibody immunofluorescence; anti-GFP antibody immunostaining; GFP-tagged protein detection; anti-GFP antibody validation)
Abe Y, et al. FEBS J. 2008;275(2):318-331. PMID: 18081866
“LIM kinase 2 (Limk2) regulates actin cytoskeleton dynamics through phosphorylation and inactivation of cofilin. Here we report that a specific splice variant of Limk2 is selectively localized to the Golgi apparatus, where it locally modulates cofilin activity and Golgi ribbon architecture. Anti-GFP monoclonal antibody was used to detect EGFP-tagged Limk2 fusion proteins in western blotting and immunofluorescence assays, confirming Golgi targeting and enabling quantitative co-localization analysis with cis- and trans-Golgi marker proteins. These findings establish a novel role for Limk2 as a Golgi-resident regulator of actin dynamics, and demonstrate the utility of high-specificity anti-GFP monoclonal antibodies for precise subcellular localization studies of GFP fusion proteins.”
(Tags: anti-GFP monoclonal antibody; GFP monoclonal antibody; anti-GFP mAb western blot; GFP antibody immunofluorescence)
For more technical references or data sheets regarding the Anti-GFP Monoclonal Antibody formats, please contact our scientific support team at message@sydlabs.com.

Other Tag Antibodies:
DYKDDDDK-Tag Monoclonal Antibody (Clone L1.1)
Myc-Tag Monoclonal Antibody (Clone 9E10)
HA-Tag Monoclonal Antibody (Clone 12CA5)
V5-tag Monoclonal Antibody (Clone SV5-Pk1)
Strep-Tag Monoclonal Antibody (Clone C23.21)
His-Tag Monoclonal Antibody (Clone 3D5)
His-tag Monoclonal Antibody (Clone HIS.H8)
GFP-tag Monoclonal Antibody
RFP-tag Monoclonal Antibody
His-Tag Monoclonal Antibody (Clone 26D11)

Loading Control Antibodies (Recommended for WB Normalization):
GAPDH Monoclonal Antibody
beta-Actin Monoclonal Antibody
beta-Tubulin Monoclonal Antibody

Related Links

See our Privacy Policy